Home
Product Directory
Industrial Equipment & Components
Drying Machine
Spray Drying Machine
Product Description
Company Info
Product Description
The PRODUCTION MINOR is a flexible spray dryer that can be applied for both R&D - where a larger capacity is required - and for small volume productions of a wide range of products.
It is a standard spray dryer in a sanitary design with several modules and options available to offer a wide range of dryer configurations - including interchangeable atomization and powder discharge systems.
Three atomization modes
The PRODUCTION MINOR offers three different atomization modes to ensure the solution that is best-suited to the task:
Rotary atomizer, variable speed, located in the ceiling air disperser. Type FS1 is for aqueous-based feeds, and type FX-1 is for use in locations where explosion-proof equipment is required. Both atomizers are covered by a patent. Different atomizer wheels are available, including wheels for abrasive feeds. Powders produced typically have a mean particle size ranging from 20-50 μ M, depending on product and operation parameters.
Co-current two-fluid nozzle, located in the ceiling air disperser; Ideal for heat-sensitive feeds. This atomizing device can handle both low- and high-viscosity feeds. Atomization occurs by compressed air at 1.0-6.0 bar. Powders produced have a mean particle size in the range of 10-40 μ M.
Fountain nozzle, located in the cone of the drying chamber, spraying upwards. The fountain mode produces more free-flowing powders typically of a mean particle size in the range of 60-90 μ M. Atomization occurs by compressed air at 1.0-6.0 bar or by pressure. This is mainly used for non-heat-sensitive products.
All atomization options can be supplied for a single plant if alternative operations are required.
Closed-cycle design for operation with organic solvents or reinforced design with venting or suppression systems for dust explosion protection is also available. Other options include an extended drying chamber cylinder and, for exhaust gas cleaning, a bag filter or wet scrubber.
Powder is collected under the drying chamber and/or the cyclone and/or the bag filter -depending on powder specification requirements.
It is a standard spray dryer in a sanitary design with several modules and options available to offer a wide range of dryer configurations - including interchangeable atomization and powder discharge systems.
Three atomization modes
The PRODUCTION MINOR offers three different atomization modes to ensure the solution that is best-suited to the task:
Rotary atomizer, variable speed, located in the ceiling air disperser. Type FS1 is for aqueous-based feeds, and type FX-1 is for use in locations where explosion-proof equipment is required. Both atomizers are covered by a patent. Different atomizer wheels are available, including wheels for abrasive feeds. Powders produced typically have a mean particle size ranging from 20-50 μ M, depending on product and operation parameters.
Co-current two-fluid nozzle, located in the ceiling air disperser; Ideal for heat-sensitive feeds. This atomizing device can handle both low- and high-viscosity feeds. Atomization occurs by compressed air at 1.0-6.0 bar. Powders produced have a mean particle size in the range of 10-40 μ M.
Fountain nozzle, located in the cone of the drying chamber, spraying upwards. The fountain mode produces more free-flowing powders typically of a mean particle size in the range of 60-90 μ M. Atomization occurs by compressed air at 1.0-6.0 bar or by pressure. This is mainly used for non-heat-sensitive products.
All atomization options can be supplied for a single plant if alternative operations are required.
Closed-cycle design for operation with organic solvents or reinforced design with venting or suppression systems for dust explosion protection is also available. Other options include an extended drying chamber cylinder and, for exhaust gas cleaning, a bag filter or wet scrubber.
Powder is collected under the drying chamber and/or the cyclone and/or the bag filter -depending on powder specification requirements.
Address:
Jiaoxi, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company, Group Corporation
Business Range:
Agriculture & Food, Chemicals, Health & Medicine, Industrial Equipment & Components, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9000, ISO 9001
Company Introduction:
Changzhou Xiandao Drying Equipment Inc. is a Joint-stock enterprise, which is specially engaged in the research, development, design and manufacture of spray dryers & Fluid-bed granulator. Its main research subject and orientation are "spray drying and the fluid-bed granulating " and it is one of enterprises which has obtained the most scientific achievements in the fields of powder technology.
On the basis of inheriting & developing former Wujin Fareast Drying Equipment Factory ′service aim, which was founded in 1969, xiandao win many customers′entrust and support with strong technical strength, advanced drying process, high quality, reliable after-service.
At present, many kinds of equipment, which are developed & produced by us, have been applied in important industrial field such as food, chemicals, pharmaceuticals, ceramics, metallurgy, feedstuff etc.
As a leader in the area of spray drying and supplier of Sinopec Group, we always insist "quality as the fundamental innovation and development" purposes, leading the country continue to advance the spray drying industry. Our company has successfully obtained ISO9001 certification in 2002.
On the basis of inheriting & developing former Wujin Fareast Drying Equipment Factory ′service aim, which was founded in 1969, xiandao win many customers′entrust and support with strong technical strength, advanced drying process, high quality, reliable after-service.
At present, many kinds of equipment, which are developed & produced by us, have been applied in important industrial field such as food, chemicals, pharmaceuticals, ceramics, metallurgy, feedstuff etc.
As a leader in the area of spray drying and supplier of Sinopec Group, we always insist "quality as the fundamental innovation and development" purposes, leading the country continue to advance the spray drying industry. Our company has successfully obtained ISO9001 certification in 2002.
